MAINTENANCE STANDARD FRONT AXLE FRONT AXLE 1. Wheel hubs drain, filling and level plug 60 ± 6 NM (6.1 ± 0.61 kgm) 2. Differential oil filling and level plug 60 ± 6 Nm (6.1 ± 0.61 kgm) 3. Differential drain plug 60 ± 6 Nm (6.1 ± 0.61 kgm) 4. Brake control fluid inlet port 14 ± 2 Nm (1.4 ± 0.15 kgm) 5. Brake circuit bleeding 14 ± 2 Nm (1.4 ± 0.15 kgm) 6. Axle beam oil breather 5 ± 1 Nm (0.51 ± 0.5 kgm) 7. Lubrication point 10 ± 1.5 Nm (1.0 ± 0.15 kgm) 8. Steering cylinder feeding 240 ± 30 Nm (24.5 ± 3.06 kgm) LUBRICATION GREASING Filling: use oil SAE 80W-90 that meets the specification SAE-J306C, API GL5 Use lithium gun grease with molybdenum bisul- phide. Applications: every 250 hours.
Oil quantity: - differential: 15 litre - epicyclic reduction (each): 2.5 litre BRAKES CONTROL Filling: use mineral oil Oil checking and changes: - Initial change at 250 hours - Subsequent changes every 2000 hours - Inspection of level every 250 hours Oil quantity necessary for activating: - min. 4.093 cm 3 x 2 - max. 10.66 cm 3 x 2 40-8 40-7