STRUCTURE AND FUNCTION CONTROL VALVE Cross-sectional drawing # The cross section is given only for the 6-spool valve (STANDARD). The cross-sectional structure of the service valves in an 8-spool valve are the same as the structure for the bucket valve, so refer to the bucket valve for details. 1. Pressure compensation valve (swing LEFT) 2. Pressure compensation valve (stabilizer EXTEND) 3. Pressure compensation valve (travel FORWARD) 4. Pressure compensation valve (boom RAISE) 5. Pressure compensation valve (arm OUT) 6. Pressure compensation valve (bucket DUMP) 7. Pressure compensation valve (bucket CURL) 8. Pressure compensation valve (arm IN) 9. Pressure compensation valve (boom LOWER) 10.
Pressure compensation valve (travel REVERSE) 11. Pressure compensation valve (stabilizer RETRACT) 12. Pressure compensation valve (swing RIGHT) Note : Pressure compensation valves are identi- fied by marking on the valve assembly. (See disassembly and assembly section for details.) 10-60