. OPERATION OPERATION ADJUSTMENT BEFORE OPERATION ADJUSTING OPERATOR'S SEAT WARNING down on the rear of the seat to tilt it backward. 3 - 82 Pa rk the machine in a safe p lace and stop the engine when carrying out adjustment of t he operator's sea A djust the seat before starti ng operations or when changing operators. A djust the position of the ope rator's seat so that you can dep ress the brak e pedal f ully with your back again st the seat backrest. (A) F ore-and-aft adjustment Pull lever (1) up, set the sea t to the desired position, the the l ever. Amount of adjustment: 180 (10 (B) Adjusting seat angle Mov Mov e lever (2) down and pu sh down on the front of the seat to it for ward.
Adjustment range: 13 degre es (Tilt forward/tilt back ang (C) Setting seat for operator 's weight rength of the suspension. Turn grip (3) to adjust the st Adjustment range: (Target) 50 to 120 kg (110 to 265 lb) (D) Adjusting backrest angl e the backrest to the front or rear. back pressed against the seat back. Mov e lever (4) up and move the backrest to the front or Whe n doing this, keep your back pressed against the se at back. If yo ur back is not against th e seat back, the seat back may spring back s uddenl Adjustment range: 66° to th e front (3° x 22 stages) ar (3° x 24 stages) 72° to re (E) Seat height adjustment Mov e lever (2) up/down, the n move the seat up or down as desired .
Since lever ( 2) is also used for adjusting seat angl e, set the seat to the de sired height while adjusting Adjustment range: 60 mm ( (F) A djusting headrest heigh Mov e the headrest up and d Adjustment range: 50 mm ( (G) Adjusting headrest angl Rota te the headrest to the fr (H) Turn grip (5) to adjust the te nsion applied to the lower b