. OPERATION OPERATION MOVING MACHINE IN REVERSE WARNING When switching between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so use extreme caution when reversing the machine. Always stop the machine completely before shifting between FORWARD and REVERSE. 3 - 95 Place gear shift lever ( 1) in the R position, the n gradual ly depress accelerator pedal (2) to move the machine off REMARK The machine canno t travel in reverse when the dump body is is raised. Lower the du mp body, set the dump lever to t he FLOAT position, then set th e gear shift lever to the R positio n.
If the gear shift leve r is set to the R position when th e machine is traveling forward at a speed of 4 km/h (2. 5MPH) or more , the transmission is pla ced in Neutral until the travel speed is is automatically applied, and the engine is he travel is reduced, the brake is also throttled. NOTICE When shifting betwee n FORWARD and REVERSE, stop the machine completely, and run th e engine at low idle when s hifting the lever. After moving the gear shift lever, do not depress the accelerat you detect that the transmi ssion clutch has engaged Do not operate the gear shift lever with the accele rator pedal depressed.
This will cause a big s hock, and will also reduce the servic e life o f the machine.