. OPERATION OPERATION SHIFTING GEAR WARNING will be poor. is raised, the speed range is set to 1st. Always lower the dump body when traveling. 3 - 98 Do not move th e gear shift lever to th e N positio n when the ma chine is traveling or when it is travelin g down a slope. Alw ays place the transmissio n in gear before trav If the transm ission is in Neutral, the engine cannot provide any braking effect and the steering wheel will become heavier.
In re will be lack of cool ing oil for th e retarder, so there is danger that it will overheat or that the actuation of the brake There may a lso be damage to the transmissi on or other par ts of the power train, and there is dan ger of unexpected accidents. When shifting gear, do as follow s. c transmission, so set gear shift ition, and the transmission will to match the travel speed. This machine lever (1) to automatically has an automati the desired pos shift to a position NOTICE When shifti ng between FORWARD and REVERSE, stop the machine completely, moving the that the tran and run the engine at low idle wh en shifting the lever.
After shift lever, do not de press the a ccelerator unt il you detect smission clutch has engaged. Do not opera te the shift lever with the accelerator pedal dep ressed. The throttle is au also reduce tomatically throttled , but a big s hock is genera ted, and will the service life of the machine. SHIFTING UP celerator pedal (2) is depressed to accelerate the 1. When ac machine, to direct d 2. If the ma automatic 1. When ac the lockup clutch is engaged to shift the tr ansmission rive. chine is accelerated further, the transmission will ally shift up. 2. If the ma ally shift up.