. OPERATION OPERATION STEERING THE MACHINE WARNING If the machine is turned at high speed or on a steep slope, there is danger that it will turn over, so do not operate the steering in such conditions. CAUTION been in the 3 - 109 Do not continue to appl y force to the steering whee l when it has turned fully to the left or right. This will make the oil temperature overheating. l temperature circuit rise and will cause To turn the machine w hen traveling, turn steerin g wheel (1) i n the direction of the turn.
When traveling around a curve, release the accelerator pedal before entering the curve, sh ift down to a lower speed range, then depress th e accelerator pedal to trav el around th e curve. Never coast around the curves at high speed. REMARK The angle of the st eering wheel may change (the position of the spoke may change sl ightly) when the machine is traveling, but this is not a failure. If force is applied to the steering wheel when t he tires have been turned fully to the left o r right, the steering wheel will turn a little at a time, but this is not a failu re.
LOADING OPERA TIONS When using a large wh eel loader to load large ro cks, if the ro cks are loaded directly into th e dump body parts of the dump body may be de formed. To prevent this, w hen loading large rocks, first load sand o r soil to act as a cushion, then load the rocks on top of this to reduce the i mpact on th e dump body. In addition, when load ing rocks that exceed the following co nditions, install the optional d ump body reinforcement plate.
e over 0.5 m (1 ft 8 in) more than 4.5 (Mohs scale) t of more than 300 kg (662 lb) steel ingots Rocks with one sid Rocks of hardness more than 4.5 (Mohs scal Rocks with a weigh t of more than 300 kg (66 When transporting NOTICE s set the dump lever to the FLOAT position regardless of whether the dump body is empty or loaded. When traveling, alway s set the dump lever to the F LOAT position regardless of whether the dum If the dump lever is not at the FLOAT position and th e gear shift le ver is not at the N position, the ce ntral warning lamp will flush and the alarm buzzer will sound.