. OPERATION OPERATION HANDLING TIRES PRECAUTIONS WHEN HANDLING TIRES WARNING below must be replaced with 3 - 114 To ensure w tires. ne Tires wh ere the bead wire has been Excessi carcass vely worn tires where more t ply (excluding the breaker) i Tires wh Tires wh ere damage to the carcass e ere ply separation has occu Tires wh ere radial cracks extend to t Tires wh and the ere there is abnormal deteri tire cannot withstand use.
Please co ntact your Komatsu distri It i s dangerous to jack up the mach T.Km.P.H (Ton-Km-Per-Hour R Tires for c onstruction equipment ar e used under severe conditions that bear no compar ison with the tires used on cars, buse s, or ordinary trucks, so t hey are specially designed to withstand these condi Compared with ordinary tires, far g reater heat is produced in the rubber internal parts of off-road tires when the machine i s traveling. If they are us ed continuously under conditions which exceed the permitted load and travel speed of t he tire, the internal tempe rature will exceed the limit, and the rubber may becom e soft and heat separation occur.
To preven t such problems from occ urring, the T.Km.P.H. is used as a standard to allow th e machine to travel safely. If o peratio ns are carried out which exceed the T.Km.P.H. of the tire (when the T.Km.P.H . of the work exceeds the T.Km.P.H . of the tires), tire trouble will occur more frequently. In such cases, do as follo ws. owered. Make t he operating conditions e asier so that the operation T.Km.P.H. of the work is l Increas e the size of the tires to a tire with a high T.Km.P.H.