Komatsu — METHOD OF LIFTING MACHINE

. OPERATION TRANSPORTATION LIFTING PROCEDURE that the area spreader bars and other lifting ropes to the lifting positions. to the 3 - 121 Lifting work can be carried out onl y with machin es displayin g a lifting When carrying o ut the lifting opera tion, stop the machin e on firm l evel ground, an d do as follows 1. Start the eng ine, set the dump l ever to the FL OAT po sition , and check that th e body pilot lamp goes out. 2. Stop the en gine, apply the br ake, and ch around the o perator's compart ment is safe. 3. equipment to match the weight REMARK The lifting posit conditions.

ions for the machine differs accordi dy:Positions (1) and (3) Total:4 places (2 at front, 2 at rear) body:Positions (1) and (2) Machine with bo dy:Positions (1) a Total:4 places (2 at front, 2 Machine without body:Positions (1 Total:4 plac es (2 at front , 2 at re The 4. Fit protector blocks at the cont act points be tween th e lifting equipment and th e body to preve nt damage t o the King equipm 5. When the m achine comes off the ground (r aised 1 0 to 20 cm(3.9 to 7.9 in)), stop the l ifting operation, c heck carefully that the machine is ba lanced and t hat the wire r opes are not loose, t hen continue th e lifting operation slowly.