. OPERATION TROUBLESHOOTING CONNECTING THE BOOSTER CABLES of the problem machine. STARTING THE ENGINE CAUTION 3 - 135 Keep th e starting switc h of the normal machi ne and problem m achine in the OFF pos Connec t the booster ca ble as follows, in the o rder of the numb ers marked in the diag 1. Connect one clip of booster cable (A) lem machine. clip of booster cable ( mal machine. of booster cable (B) mal machine. to the positive A) to the positive to the negative terminal of the prob 2. Connect the other terminal of the nor 3. Connect one clip terminal of the nor 4.
Connect the other clip of booster cable (B ) to the engine bl Make sur e tha t the parkin g brake switch is at PARK ING position and th e gear shift lever is at N (n eutral) position for both normal machine and t he problem machine. 1. Mak e sure the clips are firmly connected to the battery ter minals . 2. Star t engine of the normal machine and r un it at high idle speed. 3. Tur n the starting s witch of the problem m achine to the ST ART position and start t If th e engine doesn 't start at first, try agai n after 2 minutes or so. DISCONNECTING THE BOOSTER CABLES After the engine has sta rted, disconnect the bo oster cables in th e reverse of the order in which they were connected. 1.
Remove one clip of booster cable (B) from the engine bloc the problem machine. 2. Remove the other clip of booster cable (B) from the negativ terminal of the normal machine. 3. Remove one clip of booster cable (A) from the positive terminal of the normal machine. 4. Remove the other clip of booster cable (A) from the positive terminal of the problem machine. 1. Remove one clip of booster cable (B) from the engine bloc k of e (-) (+) (+) the problem machi ne. 2. Remove the other c lip of booster cable (B) from the negativ terminal of the nor mal machine. of booster cable (A) f mal machine. rom the positive 3. Remove one clip terminal of the nor 4.
Remove the other c lip of booster cable (A) from the positive