. OPERATION TROUBLESHOOTING IF ACCELERATOR PEDAL HAS FAILED depth, the central 3 - 138 In additi on to the potentiome ter detecting the pedal depression depth, the switc h (check switch) is installed on the acceler ator pedal assembly i n order to de tect whether the a ccelerator pedal is depressed or not If the pe dal depression depth is not detec ted correctly due t o a failure of the accelerator pedal o r incorrect electric wiring, t he engine controller c ontrols the e ngine speed responding to t he signal f rom this check s witch. The engine runs at 1500 rpm when the accelerator p edal is depresse uns ow the edal is release d. The engine speed varies depen ding on the l oad.
After us ing th e edal Komats u distributor. There a re two methods whe n operating t he accelerato r pedal: either r elease idle), or depress t he pedal fu lly (1500 rpm If the ac celerator pedal is he ld at an inter mediate position, the system may not be able to judge if the accelerator pedal is being operated or no e pedal (check s witch is OFF, low REMARK If the en cann signa the warning lamp flashes and si multaneously the alarm buzzer sounds an d user code 02