Komatsu — OTHER TROUBLE

. OPERATION TROUBLESHOOTING ACTION CODE If any problem occurs, stop the machine, apply the parking brake and check the service code, then contact your Komatsu distributor for repairs. REMARK MON: Machine monitor TM: Transmission controller ENG: Engine controller BK: Retarder controller 3 - 141 If action code "E03" is displayed on the character display (1), or if an action code is displayed af ter taking the remedy when action code "E02" was displ ayed, or if "MAINTENANCE" is displayed together with acti on code "E01", do as follows to check the failure code. ressed the top (>) portion of machine monitor mode selector switch (2) and check ode is displayed on character display (1).

chine monitor mode selector switch (2) again. The service meter and odometer conds, and the screen will then return to the action code s creen. curred, the next failure code is displayed. ontact your Komatsu distributor for repairs. The 6-digit code displayed on t he left of the line at the top of the character display is the f The code displayed at the right side of the failure code shows the controller that detected The line at the bottom of the ch aracter display shows the system where the failure was ge