Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CHECK REFRIGERANT (GAS) LEVEL WARNING 4 - 31 If t he refrigerant used in th e air conditioner gets into your ey es or on your hands, it may cause loss of sig ht or frostbite. Do not touch the refrigerant. Nev er loosen any part of the refrigeran t circuit. nt gas is leaking. Do not bring any flame clo se to any point where the refrigera nt gas is leaking. poor, there is possibly lack of refrigerant t glass (2) of receiver drier (1) on the left In side of the radiator. Before carrying out insp ection, set to the following con Start the engine and run it at approx. 1,500 rpm.

Turn the air conditio ner ON/OFF switch to the ON Set the air flow to th e maximum position. to the lowest position. windows fully. ner switch ON. Set the temperature Open the doors and Turn the air conditio If the condition of sigh t glass (2) is "correct" as sh the condition is normal.

(A own in the fter the air diagram on the right, conditioner switch is tur ned ON, a small number of bub bles will be seen, but after that, the color.) fluid becomes a transparent, milky white If t he condition of sight glass (2) is "insufficient" as s there is lack of refrigerant, s hown in the diagram on the right, o ask your Komatsu distributor to conditioner switch is continuously.) charge with refrigerant. (After the air turned ON, bubbles can be seen fter the air CHECK DUMP BODY cracks in the dump body. dy to make it easier to check. e dump body for damage. ormal wear are found, carry out repairs. Check that there are no 1. Clean the dump bo 2.

Check all parts of th If any cracks or abn Contact your Koma . Clean the dump bo . Check all parts of th ormal wear are found, carry o tsu distributor for details of the repair procedure.