Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CLEAN, CHECK RADIATOR FINS AND AFTER COOLER FINS WARNING If compressed air scattered around dust and debris, there is danger of injury. Always wear protective equipment such as 4 - 37 protective glasses and m If r adiato r fins (1) or af tercooler fins ( 2) become clogg ed or bent, it wil l caus e overheating of the engine , so always clean or carry out inspectio n, and ask yo ur Komatsu dis tributor to take th e necessary action. Cleani ng can be car ried out by usi ng jets of air, ste am, or water, but be careful not to let the nozzle contact the fin.

When using compre ssed air or ste am, keep the noz zle at a right angle t o the radiato r and after coo Exami ne the rubber hose, and if a ny cracks or britt le places are found, replace the h ose. In additi on, check also fo r loose hose clamp aning (high-pressure machin e wash) of the heat exchange equipment (radiator, aftercooler,), maintain sufficient dis tance from the machine whe n carrying out the operation. If steam cleaning (high-pressure machine wash) is carrie d out at close r ange, there is danger that th e internal fins of the heat exchange equipment may be deformed, and th is will cause ea rly clogging a nd breakage.