. MAINTENANCE SERVICE PROCEDURE EVERY 250 HOURS SERVICE CHECK OIL LEVEL IN DIFFERENTIAL CASE, ADD OIL WARNING CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 43 The pa rts and oil are at high temperature after the engine is stopped , and may cause serious burns . Wait for the temperature to go down before starting th e operation. If ther e is still pressure r emaining inside th e case, t he oil o r plug may fly out. Turn the plug slowly to release the pressure, then remov e it carefully. 1. Rem ove plug (G) an d check t hat the oil l eve l is nea r the bottom of th e plug hole . 2. If th e oil level is too low, add oil through the plug h ole until t he oil o verflows.
The pa rts and oil are at high temperature after the engine is stopped , and may cause serious burns . Wait for the temperature to go down before starting th e operation. If ther e is still pressure r emaining inside th e case, t he oil o r plug may fly out. Turn the plug slowly to release the pressure, then remov e it carefully. 1. Stop the machine so that casting line (1) is h orizont al and drain plug (P) is immediately a t th e botto m. 2. Rem ove plug (G) an d check t hat the oil l eve l is nea r the bottom of th e plug hole . 3. If th e oil level is too low, add oil through the plug h ole until t he oil o verflows.