Komatsu — EVERY 500 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK FAN BELT TENSION, ADJUST TESTING Press the belt with your thumb with a force of approx. 98 N {10 kg} (for each belt) at the midpoint between fan pulley (1) and crankshaft pulley (2). Standard deflection (A): 17 - 19 mm (0.67 - 0.74 in) ADJUSTING contact with the bottom of the groove. If the belt is stretched and there is no allowance for adjustment, or it is cut or cracked, replace it with a new belt. 4 - 60 1. Loosen nut (1). 2. Move pulley (3 the deflection is ap prox. 17-19 mm (0.67 - 0.74) wh en the be lt is pressed with y our thumb with a force o f approx.

98 N {10 kg} for each belt) and crankshaft pull When replacin andard belt is 13-15 m m (0.5 - 0.6 in). 3. Check for dam age to the pulley s, and wear of th e groove and belt. Be partic ularly careful to