Komatsu — SEAT ADJUSTMENT

. ATTACHMENTS, OPTIONS HANDLING AIR SUSPENSION SEAT HANDLING AIR SUSPENSION SEAT SEAT ADJUSTMENT WARNING the this adjustment. If your back is not pressing against the 6 - 3 Park the machine in a saf e place and stop the engine when c arrying out adjustment of the operator Adjust the seat before sta rting operations or when changing operat Adjust the position of the operator's seat so that you can depress the brake pedal fully with your back against the seat backrest.

Adjustments (E), (J), and (K) use the air compressor built into th e seat, so turn the engine st arting switch to the ON position when carrying ou (A) Fore-and-aft adjustme nt Pull lever (1) up, set the s eat to the desired position, the n relea the lever. 0 mm (7.1 in) 0 mm (0.4 in) x 18 stages) Amount of adjustment: 18 (1 (B) Adjusting seat angle Move lever (2) up and app ly your weight to the rear of the s eat. T seat will tilt to the rear. Move lever (3) up and ap ply your weight to the front of the se nt. 4 degrees (front and rear tilt: 3 stag The seat will tilt to the fro Amount of adjustment:

2 each) (C) Adjusting height of se at p and move the seat up or down to t Move levers (2) and (3) u desired position. These levers are also use d for adjusting the seat angle, so adju the seat angle to set the s eat to the desired height. mm (2.6 in) Amount of adjustment: 65 (D) Adjusting fore-and-aft Push in lever (4), set the seat cushion to the desired position, t Amount of adjustment: 60 (E) Setting seat for weigh t Sit on the seat, raise your body slightly, then operate switch (5) to adjust the strength of th Amount of adjustment: 50 - 130 kg (110 - 287 lb)(target) When + is pressed: Susp When - is pressed:

Suspe (F) Adjusting reclining an Move lever (6) up and mo ve the backrest to the front or Push your back against t he backrest when carrying out backrest, the backrest ma Amount of adjustment: Fr Rear tilt: 40 degrees (2 d