Komatsu — PRECAUTIONS WHEN USING

. ATTACHMENTS, OPTIONS HANDLING AUTOMATIC SPIN REGULATOR (ASR) the ASR. RETARDER CONTROL LEVER When the ASR is actuated and this lever (3) is used to actuate the retarder, the actuation of the ASR system is canceled. BRAKE PEDAL PRECAUTIONS WHEN USING WARNING 6 - 7 ASR ACTUATION L When the ASR swi tch is ON, this lamp (2) lig hts up if the syste m detects slipping fr om the rear wheels a nd actuates ACCELERATOR PE DAL The ASR system i s actuated only when this pedal (4) is being depressed and the travel speed is 0 to 3 0 km/h ( 0 to 18.6 MPH). If the pedal is released while th e ASR is being ac tuated, the actuation of the ASR system i s canceled.

If this pedal (5) is d epressed while the ASR is being actuated , the actuation of th e ASR syste m is CHARACTER DISP LAY If any problem occ urs in the ASR system, a n action code is s hown on this displa ACTUATION OF ASR SYSTEM ASR switch is ON. The ASR system c an be actuated when the ASR switch is O When the system detects slipping of the rea r wheels and the ASR is actuated, th e ASR actuation lam p lights up. The ASR system i s actuated when the ASR sw itch is at the ON po sition. If any problem oc curs in the system and it can not carry out prope r control, an action co de is shown o n the character display on the machine m Drive the machine onitor, and the ASR system is canceled.

and turn the ASR switch OFF. immediately to a safe place, stop the machine, and turn the ASR swit On road surfaces with an extremely low wear coefficient (icy road surfaces, etc.) or on s teep slopes, it may be i mpossibl e to drive safely even when the ASR is actuated. On road surface s where it is possible to c arry out normal tr avel even when the ASR switch is turned OFF, if the road surface is slippery, be extremely car eful not to let the machine slip to the side. If both rear whe els slip at the same spee d, the ASR will no t function. In this ca se, adjust th e engine output with the accelerator pedal.