. ATTACHMENTS, OPTIONS HANDLING ABS PRECAUTIONS WHEN USING WARNING function is when the secondary 6 - 12 When the ABS is actuated o n a slippery road surface, the stopping d istance will become s lightly longer.
In addition, when traveling a t extremely low speed, the wheels may l ock, so be very carefu l when driving When traveling on roads wit h an extremely low friction coefficient (i cy roads, etc.) or whe n traveling up or d own a steep hill, it may not be possible to ens ure safe travel even with the ABS instal In such cases, carry out mai ntenance on the road surface before tra When the ARSC is being use d, even if there is a tendency for the wh eels to lock, th e ABS is not a ctuated The ABS is actuated when th e retarder control lever or brake pedal a After turning the ABS main s witch ON, it takes a short time for the pre paration of the ABS op eration , so the AB S is no t actuated for 2 seconds.
Turn the ABS main switch ON beforehand if it is to b It is possible to carry out normal travel even when the ABS m ain switch is OFF. However, be extreme ly careful about the machine slippin g to the side when traveling on slip pery road surfaces. Even if there is a failure in the ABS system, it is possible to carr y out normal t ravel. However , be extreme ly careful about the machine slippin g to the side when traveling on slip pery road surfaces. If any problem occurs in t he ABS system, the system is autom atically turne d OFF , so th e conditio n becomes the same as for a machine w hich does not have the ABS installe d.
Even when the ABS syst em is installed, the secondary brak brake is actuated, even if the wheels lock, the ABS is not act maintained, but When equipping the mac hine with a wireless system, install it as far as possible f rom th e system equipment and wiring. In addition, when equippi ng the machine with a wireless syste m, check carefully that th e wireless and operating system do not break any laws regulating use of the airwaves .