. ATTACHMENTS, OPTIONS USE OF REAR VIEW MONITOR MANUAL SWITCH When this switch (2) is pressed, an image of a camera appears on the monitor display. At that time, a mark "CAM1" appears on the upper left side of the display and a figure "5" on the upper right side of the display. REMARK When the manual switch is pressed to call an image and the operation is suspended thereafter, the image disappears in approx. 5 minutes, turning the display into a waiting condition. This is a function in case the operator forgets to switch off the display (timer function). The time until the monitor display is automatically switched off is shown on the upper right side of the display.
It changes by minute and in the descending order as 5 4 3 2 1. Moreover, when the remaining time comes down to just 10 seconds before the monitor display goes off, the last figure "1" on the upper right side begins to flash. When the manual switch is pressed to call an image and it is pressed again while the image is shown on the monitor display, it remains on the display for approx. 5 more minutes from the moment the switch is pressed. When the gearshift lever is in the "R" position, the timer function does not work. ZOOM/IRIS SWITCH (REVERSE LIGHT COMPENSATION SWITCH) Zoom Function (press the switch) By pressing this switch (3), an image on the monitor display can be enlarged by 1.4 times.
At that time, a mark of "ZOOM" is shown on the upper right side of the display. When the switch is pressed again, "ZOOM" disappears and the display returns to the original image. WARNING 6 - 74 Iris Function (Reverse Light Co mpensation Function) (Keep the switch pressed for more t When the iris function is activated (turned "ON"), the whole monitor displa y becomes brighter. As a result, some portion o n the display becomes difficult to read or discern, while it is easy to do so with th e iris function turned "OFF ". Therefore do not us e this function except when it is necessa ry to read or see a dim portion.
When it is difficult to see a mon itor display due to a reverse light, keep this switch (3) for m ore than 1 second , and then the iris function (reverse li ght compensation function) is turne d "ON", turning the disp lay brighter and m aking it easier to see. ppears on the upper left side of the display. At that time, a mark of "IRIS" a ppears on the upper left side of the display. If the switch is further kept pres sed for more than 1 second, the iri s function (reverse light compensation function) is turned "OFF" and "IRIS" mar k goes off.