. ATTACHMENTS, OPTIONS EXTERNAL POWER SOURCE TYPE ELECTRIC HEATER 6 - 79 HANDLING EXTERNAL POWER SOURCE TYPE ELECTRI C HEATER This is a starting aid to use in seasons when the ambient temperature go es down to -20 - -40°C (-4 - -40 °F), or even in temperatures above that if it is difficult to start the engine because of the cold. Use a n external power source (single phase AC 200-250V), to warm the engine coolant and the oil in the engine oil pan to make it easier to start the engine. PROCEDURE FOR SETTING UP EXTERNAL POWER SOURCE FOR EXTERNAL POWER SOURCE TYPE ELECTRIC HEATER 1. W Fo 2. It to Fo IN 3. Th to he 1.
W hen using this preheater, it is necessary to set up an external pow r details, see "ESTABLISHING POWER SUPPLY (PAGE 6-82)". 2. It is necessary to have a cable made locally to bring the above elec tric power from the external power source the socket installed on the machine. r details of the procedure for making the cable, see "MANUFAC PUT CABLE (PAGE 6-80)". TURING EXTERNAL POWER SOURCE 3. Th e external power source input cable is the electric cable to bring the electricity from the local AC power supply the input socket (receptacle) on the machine. Connect it as sho ater. wn in following Fig to operate the electric Note 1:
The electric leakage breaker is installed to prevent danger of in the machine. Note 2: The reason for connecting the ground cable to the ground is Note 3: This is to prevent any drop in voltage. ote 1: The electric leakage breaker is installed to prevent danger of electrocution if the electrical supply leaks the same as for Note. 1. ote 2: The reason for connecting the ground cable to the ground is ote 3: This is to prevent any drop in voltage.