Komatsu — 24.9.2 REPLACE HYDRAULIC TANK BREATHER ELEMENT

MAINTENANCE 24.9.2 REPLACE HYDRAULIC TANK BREATHER ELEMENT WARNING ! The oil will be hot if the machine was just operated. Wait for the oil to cool down before changing it. ! When removing the oil filler cap turn it slowly to release the internal pressure, then remove it carefully. 1 Loosen bolt (1) at the top of the cap. 2 Remove the cap, then take out the element. 3 Coat the O-ring of the new element with grease, then install the element. 4 Align the cap with the body and tighten the bolts. 3-63