Komatsu — 24.9.4 CHANGE AXLE OIL

MAINTENANCE 24.9.4 CHANGE AXLE OIL WARNING The oil is hot if the machine has just been operated. Wait for the oil to cool down before changing it. 1. Set a container to catch the oil under drain plug (P). 2. Remove front and rear oil filler plugs (1), then remove drain plug (P) to drain the oil. 3. After draining the oil, clean drain plug (P), then install it. 4. Add axle oil throug plug hole (1) to the specfied level For details of the oil to use and refill capacity see "20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE on page 3-10 To be sure that the oil is at the specified level, see "24.2.3 CHECK AXLE OIL LEVEL, ADD OIL" on page 3-34. REMARKS:

For operations where the brake is used frequently, change the axle oil at shorter intervals. 3-67