SLIDE RAIL SUSPENSION jPWRI41 INSTALLATION Reverse the "REMOVAL" procedure. Note the following points. 1. Place the slide rail suspension CD into the track, and fit the front pivot arm holding bolts. Then fit the rear pivot arm bracket mounting bolts. NOTE: ___________ _ Do not tighten the bolts at this point. Finger - tighten the bolts. 2. Tighten: Suspension mounting bolts: Front [A] : 68 Nm (6.8 m • kg, 49 ft Ib) Rear [ill : 20 Nm (2.0 m • kg, 14 ft Ib) Guide wheel bolt (center): 27 Nm (2.7 m· kg, 20 ft· Ib) 3. Adjust: • Track tension (See page 2-21) • Spring preload (See page 2-43) 4-36 http://ReadManuals.com