Yamaha Exciter II-570 — Front Axle and Track

FRONT AXLE AND TRACK 1~141 INSTALLATION Reverse the uREMOVAL" procedure. Note the following points. 1. Install: • Sprocket wheels CD • Guide wheels ® NOTE: ___________ _ • When pressing the sprocket wheels onto the front axle, align the lugs on each sprocket wheel. • Locate each sprocketwheel and guide wheel on the axle where shown in the illustration. 2. Place the track in the chassis. NOTE: _____________________ _ Be sure it is positioned as shown in the illustra- tion. [AI TURNING DIRECTION 3. Install: • Front axle CD NOTE: ___________ ___ • Install the front axle, push up the splined end toward the chain housing, and install the threaded end into the speedometer gear hous- ing side.

Be sure the lugs correctly engage the track. 4. Tighten: Screw®: 6Nm (0.6 mokg, 4.3 ft 0 Ib) Front axle nut: 90 Nm (9.0 m 0 kg, 65 ft Ib) Speedometer gear assembly bolt: 23 Nm (2.3 m 0 kg, 17 ft 0 Ib) 4-39 http://ReadManuals.com