Yamaha Exciter II-570 — Engine Assembly and Adjustment

ENGINE ASSEMBLY AND ADJUSTMENT 1 ENG 1 "'-I NOTE: ______________________ ___ Pass the magneto leads through the hole, and install the grommet into the crankcase. Screw (stator plate): 7 Nm (0.7 m· kg, 5.1 ft ·Ib) 2. Install: • Magneto rotor • Washer • Nut (magneto rotor) Be sure to remove any oil and/or grease from the tapered portion of the magneto rotor using a dampened cloth with thinner. NOTE: ______________________ __ When installing the magneto rotor, make sure the woodruff key is properly seated in the keyway of the crankshaft. 3. Tighten: Magneto rotor nut CD : 85 Nm (8.5 m • kg, 61 ft • Ib) NOTE:

______________________ __ Use the Universal Rotor Holder (90890-01235, YU- 01235) ® to hold the magneto rotor ®. 4. Install: • Pickup coil CD • Crankcase cover ® • Engine bracket ® Bolt (crankcase cover): 23 Nm (2.3 m • kg, 17 ft· Ib) 5-21 http://ReadManuals.com