IGNITION SYSTEM I ELECI iiii I HANDLEBAR SWITCH (RIGHT) uENGINE STOP" switch and Throttle Switch 1. Disconnect: • Handlebar switch (right) coupler CD 2. Connect: • Pocket tester (90890 -03112, YU -03112) 3. Check: • uENGINE STOP" switch continuity Faulty~Replace. Switch position Good condition OFF (Push) 0 o : Continuity x : No continuity RUN (Pull) x 4. Check: • Throttle switch continuity Faulty~Replace. Throttle switch Good condition position Throttle lever is 0 operated. Throttle lever is not operated. x 0: Continuity x: No continuity CARBURETOR SWITCH 1. Disconnect: • Carburetor switch lead 2. Connect: • Pocket tester (90890 -03112, YU -03112) 3. Check:
• Carburetor switch continuity Faulty~Adjust (See page 7-6) or replace. Carburetor switch Good condition position Throttle lever is operated. x 9 B BIY I I Throttle lever is not operated. 0 0: Continuity x: No continuity 8-27 http://ReadManuals.com