SIGNAL SYSTEM I ELECIIlliiiii I BRAKE LIGHT SWITCH 1. Disconnect: • Brake light switch coupler 2. Connect: • Pocket tester (90890-03112, YS-03112) (to brake light switch coupler) 3. Check: • Brake light switch continuity Faulty--tReplace. Switch position Good condition Brake lever is 0 opetate Brake lever is not operate x 0: Continuity x: No continuity THERMO SYSTEM 1. Disconnect the thermo switch lead (Green/ Red) and remove the thermo switch CD . Handle the thermo switch with special care. Never subject it to strong or allow it to be dropped. Should it be dropped, it must be replaced. 2. Connect the pocket tester CD (90890 -03112, YU -03112) to the thermo switch ® . NOTE:
______________________ __ CD Set the tester selector touQ x 1" position. 4 3. Immerse the thermo switch in coolant @and check the thermo switch for operation. Coolant Operation temperature Less than The switch is open. 98°e (209°F) (oon) 98°C (209°F) or more The switch is closed.(On) @ Temprature gauge 8-37 http://ReadManuals.com