_________________________ S_P_A_RK_P_L_U_G II~g!I~1 -- 2E011 ENGINE SPARK PLUG 1. Remove: • Spark plug 2. Inspect: • Electrode G) Wear/Damage---->Replace. • Insulator color ® 3. Measure: 377000 • Plug gap @ Out of specification->Regap. Use wire thickness gauge. Spark plug gap: 0.7 - 0.8 mm (0.028 - 0.032 in) Clean the plug with a spark plug cleaner if necessary. Standard spark plug: BR9ES (NGK) Before installing a spark plug, clean the gasket surface and plug surface. 4. Tighten: • Spark plug Spark plug: 28 Nm (2.8 m • kg, 20 ft Ib) (~Jl NOTE: _______________________ _ Finger-tighten G)the spark plug before torquing ® to specification. 377-004 2-3 http://ReadManuals.com