Yamaha Exciter II-570 — Engine

I IANOSJP I to) I COOLING SYSTEM ~ -------------------------------------------------------- 2E061 COOLING SYSTEM Coolant Replacement NOTE: The coolant should be changed at least seasonally. 1. Place the machine on a level surface. 2. Remove: • Side cowling (right) • Seat Muffler • Exhaust pipe 3. Remove: • Coolant filler cap CD A WARNING Do not remove the coolant filler cap CD when the engine is hot. Scalding hot fluid and steam may be blown out under pressure, which could cause serious injury. When the engine has cooled, place thick rag like a towel overthe radiator cap, Slowly rotate the cap counterclockwise to the detent. This procedure allows any residual pressure to escape.

When the hissing sound has stopped, press down on the cap while turning counterclockwise and remove it. CD. 5. Remove: 4. Place an open container under the drain bolts • Drain bolts 6. Drain the coolant. NOTE: ________________________ _ Lift up the tail ofthe machine to drain the coolant. 2-7 http://ReadManuals.com