DRIVE V-BELT ~ --------------------------------------------------------- I IANOSJP I to) I 2E141 POWER TRAIN DRIVE V-BELT A WARNING • Be sure there are shims (2 pcs) CD between secondary fixed and sliding sheaves when installing the NEW belt. 805-030 Ifthere is no gap, the clutch engagement speed ..... ----------~;;;.-------... will be reduced. The machine may move unexpectedly when the engine is started . • The spacer of the secondary sheave should be adjusted. To ensure proper clutch performance, the spacers in the secondary clutch must be repositioned as the V-belt wears.
"" V-belt width CD Number of spacers 00 35 mm (1.38 in) or more 2 spacers rnJ 34 mm (1.34 in) 1 spacer II ~I ~ 33 mm (1.30 in) No spacer 32 mm (1.25 in) or less Replace the V-belt ~II 805-029 1. Remove: • Drive V-belt guard CD 805-020 2-17 http://ReadManuals.com