Yamaha Exciter II-570 — Power Train

TRACK TENSION ADJUSTMENT I':gr I_I a. Starttheengineand rotatethetrackoneor two turns. Stop the engine. b. Check the track alignment with the slide runner@. If the alignment is incorrect, turn the left and right adjusters to adjust. Track alignment ®Shifted (j) Shifted to right to left G) Left adjuster Turn out Turn in ® Right adjuster Turn in Turn out @) Track metal ® Gap @ Forward ® Slide runner ® Track c. Adjust track deflection to the specified amount. Track deflection More than Less than specified specified G) Left adjuster Turn in Tur~ out Turn in Turn out The adjusters should be turned an equal amount . • Recheck alignment and deflection.

If neces- sary, repeat steps a to c until proper adjust- ment is achieved. • Tighten the rear axle nut. 820-005 Rear axle nut: 75 Nm (7.5 m • kg, 54 ft· Ib) 820-009 2-23 http://ReadManuals.com