GEARING SELECTION 1'~8! I ~ I GEARING SELECTION The reduction ratio of driven gear to drive gear must be set according to the snow condition. If there are many rough surfaces or unfavorable snow conditions, the drive/driven gear ratio should be made larger. If there are few rough surfaces or better snow condition; the ratio should be made smaller. Gear Ratio Chart The following drive and driven gears and chains are available as options. The figures in upper lines represent the driven and drive gear ratios, while those in lower lines represent the number of chain links. NOTE: Do not set the gearing to any of the indicated (x) settings.
~ 16 [ill Driven gear 17 18 33 X 1.94 68 1.83 68 35 2.19 68 2.06 68 X [g Drive gear options lm Chain options [ill [IJ [8] For EX570(E)/ST For EX570SX No. of links [ill For EX570(E)/ST [IJ For EX570SX [EJ Sprocket Teeth 89J-17682-60 8AY-17682-60 16 T 94860-02068 94880-03068 68 89J-17682-70 8AY-17682-70 89J-17682-80 8AY-17682-80 17T 18T [g Driven gear options [ill For EX570(E)/ST [IJ For EX570SX [EJ Sprocket Teeth 89J -47587 -30 89A-47587-30 33T 89J-47587-50 89A-47587-50 35T 2-40 http://ReadManuals.com