Yamaha Exciter II-570 — Front Suspension

FRONTSUSPENSION ICHASIJ 2. Install: • Suspension arm Always use a new circlip. NOTE: ______________________ __ Install the suspension arm so the "L" mark is on the left side and the "R" mark is on the right side. 3. Tighten: Suspension bracket nut: 21 Nm (2.1 m 0 kg, 15 ft 0 Ib) Set screw: 2 Nm (0.2 m 0 kg, 1.4 ft 0 Ib) LOCTITE® NOTE: ______________________ _ • Install the suspension bracket so the "L" mark is on th~ left side and the "R" mark is on the right side. • Install the spring with the small pitch side ® upward. 4. Tighten: 10 Nm (1.0 m 0 kg, 7.2 ft 0 Ib) Shock absorber nut Absorber holder bolt: 5 Nm (0.5 m 0 kg, 3.6 ft Ib) Locknut (shock absorber):

16 Nm (1.6 m 0 kg, 11 ft olb) Front arm nut: 43 Nm (4.3 m 0 kg, 31 ft 0 Ib) Tie-rod nut: 25 Nm (2.5 m 0 kg, 18 ft 0 Ib) NOTE: ________________________ _ Be sure to install the front arms so that the "UPPER" mark is located inthe upper position and the "LOWER" mark is in the lower position. Always use a new cotter pin. 3-15 http://ReadManuals.com