Yamaha Exciter II-570 — Front Axle and Track

FRONT AXLE AND TRACK IP~~Rlo: 01 INSTALLATION Reverse the "REMOVAL" procedure. Note the following points. 1. Install: • Sprocket wheels CD • Guide wheels ® NOTE: ________________________ _ • When pressing the sprocket wheels onto the front axle, align the lugs on each sprocketwheel. • Locate each sprocket wheel and guide wheel on the axle where shown in the illustration. 2. Place the track in the chassis. NOTE: ______________________ __ Be sure it is positioned as shown in the illustra- tion. [A] TURNING DIRECTION • Front axle CD NOTE: ________________________ _ 3. Install:

• Install the front axle, push up the splined end toward the chain housing, and install the threaded end into the speedometer gear hous- ing side. Be sure the lugs correctly engage the track. 4. Tighten: Front axle nut: 90 Nm (9.0 m • kg, 65 ft • Ib) Speedometer gear assembly bolt: 23 Nm (2.3 m • kg, 17 ft • Ib) 4-33 http://ReadManuals.com