_____________ ~_R_B_U_RE_T_O_RlcAMI~1 REMOVAL (EX570(E)/ST) NOTE: ______________________ _ The following parts can be cleaned and inspected without disassembly. • Starter plunger • Main jet (left side) • Pilot screw 1. Remove: • Blind cover ill • Bolts ® (intake silencer) 2. Disconnect: • Starter cables ill (with starter plunger) Take care so that the coil spring, starter cable adjuster and starter plunger do not fall off or are not lost. Also use special care not to scratch the starter plunger surface. 3. Disconnect: • Carburetor switch (T.O.R.S.) leads ill 4. Disconnect:
• Fuel deiivery hoses ill • Water hoses ® A WARNING Turn the fuel cock to the "close" position and plug the fuel delivery hoses so that fuel does not run out. Spilled fuel can be a fire hazard. 7-10 http://ReadManuals.com