Yamaha Exciter II-570 — Electrical Starting System

_________________ EL_E_C_TR_I_CA_L_S_T_A_RT_I_N_G_S_VS_T_E_M_IELECIIiiI TROUBLESHOOTING STARTER MOTOR DOES NOT OPERATE. A WARNING Before starter motor operation, push the "ENGINE STOP" switch to "OFF". A NO l I Check the battery and connectors. 1. Connect: • Starter relay terminals (battery side and starter motor side) OK lNO Charge and/or replace the battey. Repair and/or replace the starter motor. CD Jumper lead 2. Check: • Starter motor operation A WARNING A wire for the jumper lead CD must have the equivalent capacity as that of the battery lead or more, otherwise it may cause the jumper lead to be burned.

This check is likely to produce sparks, so be sure that no flammable gas or fluid is in the vicinity. ~OK B 1. Disconnect: • Starter relay connector 2. Connect: • Starter relay connector terminals NO l I Replace the starter relay. CD Jumper lead 3. Check: • Starter motor operation ~OK * 8-7 http://ReadManuals.com