________________________ SI_G_NA_L_S_y_ST_E_M_IELECliiil BE16l "WATER TEMP" AND/OR MOIL LEVEL" WARNING LIGHTS DO NOT COME ON. Check the "WATER TEMP" and/or "OIL LEVEL" warning light bulb(s). (see page 8-27) NO CONTINUITY I Replace the bulb(s). Check the lighting coil (I). (see page 8-33) FAULTY I Replace the lighting coil (I). FAULTY Check the thermo switch or oil level gauge. ~OK Correct connection and/or replace the rectifier regulator (II). Replace the thermo switch or oil level gauge. NOTE: ____________________________________ _ The warning lights come on for a few seconds after the engine starts. Ifthe lights do not come on, check the warning light circuit and bulb(s).
If the lights still do not come on, replace the warning light checker(s). Recheck to be sure the warning lights light. 8-32 http://ReadManuals.com