SECONDARY SHEAVE ~141 REMOVAL 1. Remove: ll~ • Side cowling (left) (See page 2-3) • Drive V-belt guard • Drive V-belt (See page 2-16) 2. Apply the brake to lock the secondary sheave. 3. Remove: • Bolt (secondary sheave) CD • Washer ® • Shim (s) ® • Collar @ • Secondary sheave ® DISASSEMBLY AWARNING • Use extreme CAUTION when disassembling the secondary sheave as serious injury can occur from the sudden release of spring tension. Use the Sheave Compressor (-.VS- 28891) to contain the spring tension before removing the retaining clip . Do not attempt the procedure unless you have the proper tools and understand the instructions thoroughly. • Circlip CD • Washer ® NOTE:
______________________ __ 1. Remove: Attach the Sheave Compressor (-,YS-28891) ® to compress the secondary sheave spring. 4-11 http://ReadManuals.com