Yamaha Exciter II-570 — Drive Chain Housing and Jackshaft

I POWTRRI~ I DRIVE CHAIN HOUSING AND JACKSHAFT VUH -------------------------------------------------- INSPECTION 1. Inspect: • Drive chain housing CD • Cover (drive chain housing) 00 • Bearing holder ® Cracks/Damage --+ Replace. • Oil seals (drive chain housing) @ Damage/Wear --+ Replace. • Bearings (drive chain housing) ® Pitting/Damage ~ Repalce . • Bearing (bearing holder) ® Pitting/Damage --+ Replace bearing and inner race holder as a set. Replacement steps: • Remove the circlip (bearing holder) (j) . • Remove the bearing(s) ® ® using a general bearing puller. • Install the new bearing(s). NOTE: ___________ _ Use a socket ® that matches the outside diameter of the race of the bearing.

Do not strike the inner race ® of balls ® of the bearing. Contact should be made only with the outer race (j]) . • Install the new circlip (bearing holder) . Always use a new circlip. 2. Inspect: • Drive gear teeth CD • Driven gear teeth 00 • Chain tensioner ® Pitting/Wear/Damage --+ Replace . • Drive chain @ Wear/Damage --+ Replace. Stiff --+ Clean or replace. 4-21 http://ReadManuals.com