Komatsu — LOADING AND UNLOADING WITH TRAILER

. OPERATION TRANSPORTATION LOADING AND UNLOADING WITH TRAILER WARNING 3 - 91 When loading or unloading, check that travel speed boost monitor (1) is off, and always travel at low spee d. If the monitor is on, the speed is s et to high-speed travel, so press travel speed selector switch (2). d is shifted to low-speed travel. Monitor (1) goes out and the spee Always keep the one-touch decel eration switch (if equipped) at the OFF position during loading or unload ing operations. When loading or unloading, run t he engine at low speed, travel at low speed, and operate slowly. When loading or unloading the m road surface.

Keep ample distance between the Use ramps with ample width, leng achine, park the trailer on a flat firm road shoulder and the machine. th, thickness, and strength, and install them at a maximum slope of 15°. When using piled soil, compact t face from collapsing. Remove the mud from the under slipping to the side on the ramps he piled soil fully to prevent the slope carriage to prevent the machine from . Remove any water, snow, grease , oil, or other substances stuck to the ramps. Never change the direction of trav el when the machine is on the ramps. There is danger that the machine may tip over.

surface or the trailer platform, then Return the machine to the road change the direction of travel. It is dangerous to use the work eq uipment for the loading or unloading operation. Never operate any lever other tha n the travel lever on the ramps. The center of gravity of the mach ine will change suddenly at the joint between the ramps and the truck or trailer, and there is a hazard of the machine losing its balance. Trav el slowly over this point. Swinging the upper structure whe n the machine is loaded on a trailer or truck makes the machine unsta ble, so pull in the work equipment structure slowly.

completely and swing the upper On machines with the cab specif ication, always check that the sliding door is locked in position, both w hen it is open and when it is closed. If the door is open or closed on the ramps or on the platform of the trailer, there isdanger that the ope rating effort willsuddenly change. Do not open or close the door on the ramps or trailer platform. When loading or unloading, alw ays use ramps or a platform. Proceed as