Komatsu — LIFTING MACHINE

. OPERATION TRANSPORTATION LIFTING MACHINE WARNING CAUTION the top of the cab to lift the weight, see the section of contact your Komatsu distributor for information. 3 - 97 Never rais e the machine with any worker on it. for lifting the machine is of ample strength for the weight of the machine. Always m ake sure that the wire rope used for lifting the machine is of ample strength for the we Never lift the machine with the upper stru cture swung to the side. Swing the work equipment so that it is at the sprocke t end and set th e undercarriage and upper stru cture parallel before lifting. . sed. e other than the posture given in the procedure below. se its balance.

When lifti ng, keep the machine horizontal Never go under the machine when it is rai Never try to lift the machine in any postur e other than the posture given in the procedure below There is a hazard that the machine may lo It machine. It is prohi bited to use the transportation h the machi ne. This will damage the track f NOTICE For the The lifting procedure applies to machines The meth actually i od of lifting differs according to nstalled. In such cases, ple When lifting the machine, carry out the operation on flat ground as 1. 2. 3. 4. 1. Start th e engine, then swing the u work eq uipment is at sprocket (1) en upper s 2. Raise t 3. Extend fully.

When t operate the boom swing control ped to the tr ack frame, then set the swin position