. MAINTENANCE MAINTENANCE PROCEDURE 4 - 18 Air Cleaner Element - Clean/Replace 1. Open the en gine rear co ver and coo ling cover. For details, see "COOLING COVER 2. Remove clip s (2), then r emove dust cup (3). PC27MR PC35MR 3. Take out ele ment (4) an d cover the a ir connecto r at the e nd of the air clean er body with a clean clo th or tape. 4. Clean the i nside ust vacuator va lve (5 5. Direct dry c ompressed air (Max. 0. 69 MPa (7 kgf/cm2, 99.4 PSI)) from t direct the co again from t 1) Replace repeate 2) Replace appears though i PSI)) from t he inside of t he outer ele ment along i ts folds.
Then direct the co mpressed a ir from the o utside along the fold s, and again from t he inside. nt which has been cleaned 5 times hroughout a year. when the dust indicator red piston installing the cleaned element even en cleaned 6 times. 1) Replace the eleme repeate dly or used t hroughout a 2) Replace element soon after when the d installing th ust indicat piston appears after e cleaned element even 6 times. element even though i t has not be en cleaned 6 times.