Komatsu — EVERY 500 HOURS SERVICE

. ATTACHMENTS AND OPTIONS POWER ANGLE BLADE WHEN REQUIRED EVERY 500 HOURS SERVICE 6 - 21 Lubricatin Carry out greasing if the work equipment has been removed or Carry out greasing also if any abnormal noise is heard from the p in portion when carrying out the angling operation 1. Using a grease pum grease through the grease fittings shown by arro 2. After g reasing, wipe off any old grease that was pushed ou (1) Angle pin (1 place Lubricatin 1. 2. 1. Using a fittings shown by arro 2.

After g reasing, wipe off any old grease that was pushed ou (1) Lift cylinder foot p in (1 place (2) Lift cylinder rod e nd pin (1 place (3) Blade foot pin (2 (4) Angle cylinder rod end pin (1 place) (5) Angle cylinder foo t pin (1 place) grease through the