Komatsu — LEAVING OPERATOR'S SEAT WITH LOCK

. SAFETY SAFETY INFORMATION SAFETY EQUIPMENT 2 - 11 Be sure that all guards and co vers are in their proper position. Have guards and cove they are damaged. Understand the method of use of safety features and use them Never remove any safety feat ures. Always keep them in good KEEP MACHINE CLEAN system, there is a hazard that it If water gets into the electrical will cause malfunctions or mis steam to wash the electric operation. Do not use water or al system (sensors, alternator, , connectors).

starting motor, solenoid valves If inspection and maintenance is carried out when the machine is still dirty with mud or oil, ther e is a hazard that you will slip and fall, or that dirt or mud will get machine clean. When washing the machine into your eyes. Always keep the with the floor open (tilted), cover with vinyl to prevent water from getting into the electrical system. KEEP OPERATOR'S COMPARTM ENT CLEAN When entering the operator's compartment, always remove all mud and oil from the s If you operate the pedal with mud or oil affixed to your shoes, your foot may slip and g around the operator's compartment. your foot may slip and accident.

Do not leave parts or tools lyin Do not stick suction pads to th e window glass. Suction pads ac t as a lens and may c Do not use cellular telephones inside the operator's compartment when driving or ope Never bring any dangerous ob jects such as flammable or explosive items into the op LEAVING OPERATOR'S SEAT WI TH LOCK operator's seat (such as when indow or roof window, or when Before standing up from the opening or closing the front w removing or installing the botto m window, or when adjusting the operator's seat), lower the wo rk equipment completely to the ground, set lock lever (1) secur ely to the LOCK position (L), then stop the engine.

If you accide ntally touch the levers when they are not locked, there is a hazar d that the machine may suddenly move and cause serious injury or property damage. When leaving the machine, al ways lower the work equipment and blade completely to the gr ound, set lock lever (1) to LOCK position (L), then stop the en gine. Use the key to lock all the equipment. Always remove th e key, take it with you, and keep it in the specified place.