Komatsu — SAFETY RULES FOR CHANGING MACHINE DIRECTIONS

. SAFETY SAFETY MACHINE OPERATION OPERATION the forward avoid in the on the be operator's and 2 - 21 CHECKS BEFORE OPERA TION ecks, move the machine to a wide area where there are no obstructions, and operate ne near the machine. t belt. When carrying out the ch slowly. Do not allow anyo Always fasten your sea Check that the moveme nt of the machine matches the display on the control pattern card. If it does not match replace it immediately w ith the correct control pattern ca Check the operation of system, swing system, Check for any problem i n the sound of the machine, vibr ation, heat, smell , or g auges ; check als o that ther e is no leakage of oil or fuel.

carry out repairs immediately. If any problem is found, SAFETY RULES FOR CHANGING MACHINE DIRECTIONS Before traveling, position the upper structure so t Before traveling, posit sprocket is at the rear o f the operator's cab. If the sproc the front of the operator 's cab, the machine makes a mo reverse to the control lever movement (for example, becomes reverse, and left becomes right). Be careful t ent of the machine. k again that there is no one hat there are no obstacles. the horn to warn people in the such a reverse movem Before travelling, chec surrounding area, and t Before travelling, sound Always operate the ma chine only when seated.

apart from the operator to ride e rear of the machine which ca Do not allow anyone machine. If there is an area to th If seen, position a signal p erson. Take special care not to h machines or people wh en turning or swinging the mach For machines equipped with a travel alarm, check that th works properly. Always lock the do or and windows of the op n (open or closed). compartment in positio On jobsites where there is a hazard of flying objects or of entering the operator's compartment, check that the d losed. windows are securely c Always be sure to carry ou t the above precautions even w machine is equipped with mirrors.