Komatsu — PARKING MACHINE

. SAFETY SAFETY MACHINE OPERATION rocks or machine, set lock lever (1) to the LOCK REMARK into the from 2 - 26 OPERATIONS ON SNOW Snow-covered or froze n surfaces are slippery, so be e xtremely careful when traveling o r operating the machine, and do not operate th e levers suddenly. Even a slight slope may cause the machine to slip, so be particularly on slopes. rfaces, the ground becomes soft when the temperature rises, and this may cause the careful when working With frozen ground su machine to tip over. If the machine enters deep snow, there is a hazard tha t it may tip over or become burie d in the snow. Be carefu not to leave the road s houlder or to get trapped in a sn ow drift.

When clearing snow, t he road shoulder and objects pla ced beside the road are buried in the snow and cannot be seen. There is a haza carefully. rd of the machine tipping over or hitting covered objects, so always carry out operations PARKING MACHINE irm, level ground. there is no hazard of falling ng if the land is low. Park the machine on f Select a place where landslides, or of floodi Lower the work equip ment and blade completely to the When leaving the m position (L), then stop For machines equipped with a cab, there is only a lock lev left. Always close the oper ator's cab door, and use the key t the equipment in order to prevent any unauthorized per moving the machine.

Always remove the key, take it and leave it in the spe cified place. If it is necessary to pa rk the machine on a slope, alwa follows. Set the bucket on ground. Put blocks under t moving. the downhill side, then dig it he tracks to prevent the mach