. OPERATION DETAILED CONTROLS AND GAUGES Lock Lever WARNING locked. When the right lever is pulled up, the lever stand does not move, but it is locked. 3 - 17 When lea ving the operato r's compartment, set the lock lever securely to the LOCK position (L). If the lock lever is not at the LOCK po sition (L) and th e control levers are touc hed by mistake, it may lead to serious person al injury. If the loc k lever is not set securely to LOCK positi on (L), it may cause serious personal injury. Always check that the le ver is at LOCK position (L). er up, be careful not to touch the work equipment control lever. ver down, be careful not to touch the work equipment control lever.
When pu lling the lock lev er up, be careful not to t When pu shing the lock le ver down, be careful not This lever (1) is a device to lock the operation of the work equipment, swing, travel, and When the lever is pulled up, it is set to LOCK p This lock l ever is a hydra ulic lock type, so even when it is at LOCK position (L), the contro l levers and pedals m ove, but the wo rk equipment a nd and the machine d o not move. REMARK ck lever on either the left or right is not at LOCK position (L), the engine will not start. that the lock lever is at LOCK position (L) before operating the starting switch.
If the lo ck lever on eit her the left or right is n ot at LOCK position (L), the engine will n Check that the lock le ver is at LOCK positio n (L) before operating the starting switch If the en gine stops wh en the lock lever is at F REE position (F), operate the lock lever t o LOCK position (L) b efore operati ng the starting switch. Machine e quipped with c (F): Free (L): Lock When the left lever is pul led up, the lever stan Machine e quipped with c (F): Free (L): Lock When the left lever is pul led up, the lever stan locked. REMARK For machi nes equipped w ith a cab, there is only left.