. OPERATION DETAILED CONTROLS AND GAUGES OPERATION DETAILED CONTROLS AND GAUGES MUD COVER WARNING 3 - 30 3. Pull cooling cover (3) and open it fully. Cover (3) i s secure d in position by rod (4). 4. When closing cooling cover (3), lift up rod (4) and close cover (3) slightly. When the rod comes out from the groo ve, close the cover. When closing, pull o pening lever (2), then close cover (3), 2), and lock it in position. ver (1). GINE REAR COVER (PAGE 3-29)".) lower opening lever ( 5. Close engine rear co (For details, see "EN GINE REAR COVER (PAGE 3-29)".) 6. Lock the cover. Never climb on top of the cover.
There is danger that yo u may slip and When carrying out inspe ction and maintenance inside th e cover, a lway s open the cover fully and check that it is secured in position by the support l NOTICE d except when opening it. Always keep the hood locke Check the direction of the k ey slot in the opening knob to c heck that it is locked. 1. Release lock (1) of th e cover. (For details of the met hod of opening and closing th e cover w ith the lock, see "In Cas (PAGE 3-28)". e of Engine Rear Cover and Dirt Cover 2. Push opening knob (1 ) of the dirt cover to release t he lock, t hen open cover (2). 3. When dirt cover (2) is opened fully, it is secured i n position by support lever (3).
After opening dirt cov er (2), check that cover (2) i s secure d in position by support le ver (3). ver (2), pull up support lever (3) slightly, 4. When closing dirt co hold cover (2), lower it slowly, then push cover (2) in to loc k it. 5. Lock the cover.