Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING out fixed is no 3 - 39 Walk-around Checks Before starting the engine, look around and under the machin e to check for loose nuts and bolts, or leakage fuel, or coolant, and check condition of the work equipment and hydraulic system. Also check for loose wiring, and accumulation of dust at places with high temperatures. When opening the engine rear cover and cooling cover to carry inspection and maintenance, always open the cover until it is fi securely in position by the stopper.

Immediately remove any flammable materials that have accumul around the battery or engine muffler and other high-temperature p of the engine. Leakage of oil and fuel will cause the machine to c fire. Always check thoroughly and repair any problems or contact y Komatsu distributor. Check that the floor is fixed securely in position by bolts (1). If it is fixed securely in position, it may cause serious personal injury. If the machine is at an angle, reposition it level before checkin Perform the following inspections and cleaning every day befo 1. Check for damage, wear, play in work equipment, cylinder s, linkage, and hoses.

Check that there are no cracks, excessive wear, or play in any problem is found, repair it. the work equipment, cylinders, linkage, or hos 2. Remove dirt and dust from around engine, battery, and ra diator he engine or radiator. Check also that there Check that there is no dirt or dust accumulated around t flammable material (dry leaves, twigs, etc.) accumulated a of the engine, or around the battery. Remove all dirt, dust there round the engine muffler or high temperature , and flammable materials. 3. Check for leakage of water or oil around engine Check that there is no leakage of oil from the engine or leak is found, repair it. age of water from the cooling system. If a ny pro 4.

Check for oil leakage from hydraulic equipment, hydraulic tank, hoses, joints Check that there is no oil leakage. If any problem is found , repair the place where the oil is leaking 5. Check of the undercarriage parts Check track shoe, sprocket, idler, guard for damage, wear Repair them if any trouble is found. , loose bolts, or leakage of oil from rollers, etc 6. Check of the handrails and steps Check the handrails and steps for any damage or loosene loosened bolts, if any. d bolts, and repair the damaged part and tighte