SAFETY - Standard Seat belt is fastened. 3. To shorten the tether, pull on the strap. 1 WARNING DO NOT remove, modify, or replace the tether belt system with a different tether system. A failed or missing teth- er belt could allow the seat base to fully extend in the event of an acci- dent. Failure to comply may result in death or personal injury. Komfort Latch Feature WARNING Failure to adjust external tether belts properly can cause excessive move- ment of the seat in an accident. Tether belts should be adjusted so that they are taut when the seat is in its most upward and forward position. Failure to comply may result in death or per- sonal injury.
WARNING Tether Belts Make sure that the tether belt is attached to the cab floor and seat frame. It should be routed through the buckle on each side. Often the attachments are made using a split-type hook. Make sure both halves of the hook are around the anchor bracket. DO NOT set the Komfort Latch with too much slack. Too much slack may reduce the effectiveness of the seat belt. Failure to comply may result in death or personal injury. Adjust an external tether by either lengthening or shortening the strap. To lengthen it: 1. Turn the buckle to a right angle to the webbing. 2. Then pull the buckle.
To eliminate cinching, simply activate the Komfort Latch device located on the seat belt webbing at the appropriate time: 1. Adjust the seat to its proper driving position. Y53-6096-1C1 (09/20) 21